-
Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/
early tucker photos
- Thread starter Pontoon Princess
- Start date
yes, mr Loggah,
you are very much correct, patented in 1927, (almost 20 years before the tucker got their patent), Elliason motor toboggan has a very interesting history, and looks like quite a few examples are still around and used.
sure looks like tucker has inspired by the Elliason.
I have found the book "as the snow flies" is a great resource of knowledge, when you do not have a Loggah as a next door neighbor, for info about early machines.
everyone should have a copy.
you are very much correct, patented in 1927, (almost 20 years before the tucker got their patent), Elliason motor toboggan has a very interesting history, and looks like quite a few examples are still around and used.
sure looks like tucker has inspired by the Elliason.
I have found the book "as the snow flies" is a great resource of knowledge, when you do not have a Loggah as a next door neighbor, for info about early machines.
everyone should have a copy.
Attachments
Last edited:
Its interesting that the last makers of the elliason motor tobogan was the FWD motor truck co. of Clinton Iowa. There are quite a few elliason machines here in the northeast. I always liked Indian compared to Harley.
I have a copy of that as the snow flies also,I was pretty dissapointed in the Lombard section,lots of errors.
I have a copy of that as the snow flies also,I was pretty dissapointed in the Lombard section,lots of errors.
Its interesting that the last makers of the elliason motor tobogan was the FWD motor truck co. of Clinton Iowa. There are quite a few elliason machines here in the northeast. I always liked Indian compared to Harley.
again, mr loggah, you are correct,
the book 'As the snow flies' does have errors, and could have more detailed info, at least is a resource of info and is some 750 pages long, much better to have it, than not, and for us west coast folks, we had so little in the way of early over the snow machine manufactures when compared to the east coast, amazing daring over the snow folks and does tell the early years of snow travel.
also should add that you are a wealth of knowledge thank you
Last edited:
Thanks a bunch for the picture of the Elliason model.
Coincidentally, I've got a 1927 Indian motorcycle in my shop right now. It's got the same right-hand drive and a very similar looking case. I'm really looking forward to getting it moving again. Any chance you've got a close-up of the magneto?
Coincidentally, I've got a 1927 Indian motorcycle in my shop right now. It's got the same right-hand drive and a very similar looking case. I'm really looking forward to getting it moving again. Any chance you've got a close-up of the magneto?
Loggah,
Not to derail this thread too far, but...
The reason I ask about the mag is that the bike was crashed a long time ago, and then parked. The owner gave it to his son-in-law, who owns it now. He decided to fix it, but discovered the mag was bad. He found someone in California who rebuilds 'em, had it delivered and then drove out to pick it up, since you can't replace it apparently.
Now, one plug lead from the mag doesn't clear the frame. It's been through two different shops who couldn't figure it out. I suspect that the rebuilder may have replaced the original plug leads with others that are different. It could also be that the frame is tweaked from the crash. But before I go modifying anything, I want to verify how it's supposed to be.
I'd be very grateful for any pictures or info.
Not to derail this thread too far, but...
The reason I ask about the mag is that the bike was crashed a long time ago, and then parked. The owner gave it to his son-in-law, who owns it now. He decided to fix it, but discovered the mag was bad. He found someone in California who rebuilds 'em, had it delivered and then drove out to pick it up, since you can't replace it apparently.
Now, one plug lead from the mag doesn't clear the frame. It's been through two different shops who couldn't figure it out. I suspect that the rebuilder may have replaced the original plug leads with others that are different. It could also be that the frame is tweaked from the crash. But before I go modifying anything, I want to verify how it's supposed to be.
I'd be very grateful for any pictures or info.
SURE DOES!!! Thanks a million. Looks like I was right, and that the new plug leads exit the mag from a different location.
Next, the question is what to do about it. Moving the engine isn't an option. Pushing the frame out to clear the mag is a possibility, and one that I wouldn't even consider on something this old (plus some airplane & bike collector has suggested the bike may be worth absolutely sick money as-is). But it's already tweaked in a few spots from the crash, so maybe form must follow function since the plan is to make it drivable again.
Next, the question is what to do about it. Moving the engine isn't an option. Pushing the frame out to clear the mag is a possibility, and one that I wouldn't even consider on something this old (plus some airplane & bike collector has suggested the bike may be worth absolutely sick money as-is). But it's already tweaked in a few spots from the crash, so maybe form must follow function since the plan is to make it drivable again.
not really, just a poor mans version of a Thiokol/Snow Trac, would have been so much smarter to a real snow cat to start with, oh, well...
found this on eBay, late model steel pontoon 542, well used machine from the Squaw Valley Ski area, the host of the 1960 Winter Olympics, this photos looks to be from the 70's and it is a very well used machine, look at the mismatched steel and plastic pontoons, and the dual exhaust pipes tell me that there is a V-8 under the hood.
Attachments
fabulous, yes, please post photos and any history you have, great you have the tucker
do you know the guy that has the 1959 443 sedan from the 1960 Winter Olympics?
do you know the guy that has the 1959 443 sedan from the 1960 Winter Olympics?
RRose
Active member
I’d like to see some!
Last edited:
I email from iPhone to my comeputor, then move to pictures then I can attach to foreum. I am sure there is a much better way but then you got to cut slack for grey hair. (Comes from laying under cats in the sno)
Tucker must have fired the guy who designs grills during those '65-70's machines. Expanded wire mesh, seriously? But then I have seen '69's with the cast aluminum horizontal slot grills.
"Make no two the same, no snow to deep."
"Make no two the same, no snow to deep."
