• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

1542 conversion to a 1543 supersized project

olympicorange

Active member
………… for those whom like timers, ….
 

Attachments

  • 1223191415_Film2.jpg
    1223191415_Film2.jpg
    73.3 KB · Views: 379
  • 1223191415a_Film2.jpg
    1223191415a_Film2.jpg
    100.6 KB · Views: 376

olympicorange

Active member
….. poured in the ''red'' Kool-Aid ,... to test the new 1000W engine heater … 15 mins. later the upper end was ready,... granted the ambient was 29 ,... but much quicker than the old one,... :thumbup:
 

Attachments

  • 0102201358_Film2.jpg
    0102201358_Film2.jpg
    96.2 KB · Views: 363

olympicorange

Active member
……. so alittle more fab. & attaching,... routed the trans. cooler lines, mounting brackets , hardware, to cooler.... going with a ''free-air'' type , to see how that works ( came off a 350 hp cummins/roadranger; trying to use up spare parts from the ''archives''. only will do this on my ''uber'' , never for a customer. I hate to throw away good spare parts ( thx gramps)…). …. had to shorten the turbo header pipe by 7/8'' , cut & reweld,.... to align exhaust. looks like a height issue with the cab floorpans & cooler lines, possibly. will know as soon as cab is back on....coming soon.....
 

Attachments

  • 0103201440c_Film2.jpg
    0103201440c_Film2.jpg
    145.4 KB · Views: 335
  • 0103201441_Film2.jpg
    0103201441_Film2.jpg
    108.8 KB · Views: 342
  • 0103201441a_Film2.jpg
    0103201441a_Film2.jpg
    105.9 KB · Views: 338
  • 0103201518_Film2.jpg
    0103201518_Film2.jpg
    114.3 KB · Views: 355
  • 0103201530_Film2.jpg
    0103201530_Film2.jpg
    111.1 KB · Views: 343

olympicorange

Active member
……….. so , ready for some dexron…. I have dropped both driveshafts , so I can run the tranny control shaft/arm/ valve body ...thru it's range of motion. don't wanna run a track over my foot or so... brings back an old story about a manure spreader back on the farm, it wasn't easy stalling out the 'ol tractor. but that's for another time . also added in a fitting for the tranny ''mechanical' temp. gauge , on the return line , from the cooler . I also agree that is the more critical location. but why not put one in the line from tranny to cooler also, love gauges . gonna run this thing out of the shop just the way it is ….''hang on granny''.... Jethro.....
 

TalleyHo

Active member
GOLD Site Supporter
….. poured in the ''red'' Kool-Aid ,... to test the new 1000W engine heater … 15 mins. later the upper end was ready,... granted the ambient was 29 ,... but much quicker than the old one,... :thumbup:

Been watching your build. Really nice!

What fan did you choose? I was trying to find an electric for the same 4 core radiator and was unable to come across one that would push (or pull for that matter) through the 4 cores.
 

olympicorange

Active member
Been watching your build. Really nice!

What fan did you choose? I was trying to find an electric for the same 4 core radiator and was unable to come across one that would push (or pull for that matter) through the 4 cores.




…….. thx K/T ,... much appreciated. well to tell the truth , I just looked for one that would fill up the front of the rad. and the height/profile , so as to be able to close the hood , without grill mods. totally unethical. but I haven't started on the shroud(s)… I have a real H.D. unit somewhere , but it's in such a safe place,...well I can't find it...yet. so , do you have an issue with the fins on your core tubes?? bent, plugged, etc.. because that's critical...no fan will work under those conditions. they make a tool to straighten fins, etc... all I can say is...''shrouds, shrouds, and more shrouds'' … air flow is key … I think we have discussed this before...lol.. your best friend is ( and time consuming) research, specs., … etc. a lot of guyz like the hyd. fan upgrade... will that work for you..space, room, hyd. load, etc... post some pics of your engine compartment...thx.... :thumbup:
 

olympicorange

Active member
….. so, good progress today; … ATF, some wiring, reconnected the fuel lines, primed, battery, misc., etc... fired up. checked operation of trans.,... fwd./rev./speeds, etc. topped off. connected driveshafts. ''buckboard'' time... drove out of shop... backed up... fwd... well you get the idea. no steering ; next is to install ; hyd. pump, cab, hyd. tank(s) , plumbing.... thx again brother Greg, for the assistance....
 

Attachments

  • 0104201617_Film2.jpg
    0104201617_Film2.jpg
    98.8 KB · Views: 318
  • 0104201617a_Film2.jpg
    0104201617a_Film2.jpg
    116 KB · Views: 306
  • 0104201617b_Film2.jpg
    0104201617b_Film2.jpg
    89.8 KB · Views: 309
  • 0104201618_Film2.jpg
    0104201618_Film2.jpg
    92.2 KB · Views: 325
  • 0104201639_Film2.jpg
    0104201639_Film2.jpg
    87 KB · Views: 326
  • 0104201640_Film2.jpg
    0104201640_Film2.jpg
    109.8 KB · Views: 306

PJL

Well-known member
That must have been pretty awesome seeing it move under it's own power. Did you shoot a video?
 

olympicorange

Active member
……. cab time,..... took longer to ''de-clutter'' it , than to set into position,…. made a nice ''flat spot'' ,....
 

Attachments

  • 0105201617_Film2.jpg
    0105201617_Film2.jpg
    128.8 KB · Views: 303
  • 0105201617a_Film2.jpg
    0105201617a_Film2.jpg
    120.9 KB · Views: 302
  • 0105201617b_Film2.jpg
    0105201617b_Film2.jpg
    135.9 KB · Views: 312
  • 0105201618_Film2.jpg
    0105201618_Film2.jpg
    94 KB · Views: 308
  • 0105201620_Film2.jpg
    0105201620_Film2.jpg
    136.5 KB · Views: 309

DAVENET

Bronze Member
GOLD Site Supporter
Getting brighter in there every time we see it! Hit it again next summer w/ the airless sprayer, add a few of those new fangled LED overheads, an overhead propane shop heater and heck, you'll be able to find that HD fan/shroud combo!! :bolt:

Seriously, looking good!:applause:
 

olympicorange

Active member
Getting brighter in there every time we see it! Hit it again next summer w/ the airless sprayer, add a few of those new fangled LED overheads, an overhead propane shop heater and heck, you'll be able to find that HD fan/shroud combo!! :bolt:

Seriously, looking good!:applause:

…….. roger that Dave,... the gameplan was to sprayfoam everything this summer ( well not the snocats or tools,lol), peel up the asphalt , pour concrete.... I have an L/P unit that hangs from the ceiling , extra lights , etc.... well , you know how plans go.... i'm still optimistic for this summer... thx for the input ….. :smile:
 

olympicorange

Active member
……. forgot to mention , …… from yesterday..... got to the shop , so before plugging in block heater …. '' said to oneself'' … let's see what happens first ( in an attempt to start engine cold),..... cranked over three times and fired up,... granted it wasn't outdoors and covered with snow,....but it was 24 degrees . i'd say a positive note for a Cummins …. now my J D , sitting next to it, and a lot newer, won't even ''pop'' below 40 degrees....
 

olympicorange

Active member
………. started the ''glueing'' process...……..
 

Attachments

  • 0108201333_Film2.jpg
    0108201333_Film2.jpg
    112 KB · Views: 275
  • 0108201511_Film2.jpg
    0108201511_Film2.jpg
    127.3 KB · Views: 275

olympicorange

Active member
Did you end up with any conflicts with the floor & the hoses / exhaust?

….. no floors in yet... exhaust is well below floorpans. looks like the fittings for cooler lines are the highest , but handily they are directly below the cab heater box ,... so a ''hump up'' mod looks like it may not be that big of a deal... too cold today to mess with it...
 

DAVENET

Bronze Member
GOLD Site Supporter
True. Just wait until tomorrow to do it when it's 80 out. :hammer: Winter was looking good last month with that early 24" (in the south). Just 2-3" of ice crust now.
 

olympicorange

Active member
…… a few degrees better today,.... yes, 2mrw is supposed to be 50 and raining all day. looks like we'll loose our ''base'' , too bad.... we've got a nice heavy 8'' 's now. if I get up early , I may get enough hooked up to test the hyds., cab is almost done. hook up temp. gauges, o/p, volt, etc. a couple of fittings, a hose or two....
 

DAVENET

Bronze Member
GOLD Site Supporter
Wow. 64 degrees on January 11th. 58 for a LOW tonight then back to 62 tomorrow. If ice had gotten time to set up, it would be exciting for riding the dirt bike since it would be a surface reset. But ice is too sketchy to risk it.
 

olympicorange

Active member
……. yes, crazy weather , 60 on Sat., lost all the white stuff. so progress didn't get to the running stage, …. cut out the last of cab ''cancer'', replaced, & welded. fab'd the exhaust hangers; drilled , welded in place, etc. replaced seals in hyd. pump ( just to ensure that no ATF leaks into engine/oil pan, mounted hyd. tank, pump, misc., to take measurements for hyd. hoses, fittings, etc. off to the parts/box stores. started orientation of hoses. painted misc. items, repaired/fab'd areas, etc....
 

Attachments

  • 0111201906_Film2.jpg
    0111201906_Film2.jpg
    70.2 KB · Views: 152
  • 0111202007_Film2.jpg
    0111202007_Film2.jpg
    92.5 KB · Views: 161
  • 0111202007b_Film2.jpg
    0111202007b_Film2.jpg
    66.6 KB · Views: 157
  • 0111202007c_Film2.jpg
    0111202007c_Film2.jpg
    97.5 KB · Views: 169
  • 0111202027_Film2.jpg
    0111202027_Film2.jpg
    114 KB · Views: 159
  • 0111202029_Film2.jpg
    0111202029_Film2.jpg
    129.7 KB · Views: 166
  • 0111202030a_Film2.jpg
    0111202030a_Film2.jpg
    133.4 KB · Views: 162

olympicorange

Active member
and a few more that didn't load....it ''ain't'' got a hemi,... but one of these....
 

Attachments

  • 0111201803_Film2 (1).jpg
    0111201803_Film2 (1).jpg
    73.3 KB · Views: 354
  • 0111201825_Film2 (1).jpg
    0111201825_Film2 (1).jpg
    94.8 KB · Views: 358
  • 0111201414_Film2 (1).jpg
    0111201414_Film2 (1).jpg
    91.4 KB · Views: 358

olympicorange

Active member
……. thinned out the 318 electrical components ; wiring , gauges, etc.... did some ''rerouting '' of hyd. lines, fittings, misc.,... etc... started off as a warm day, then the ''Arctic'' blast rolled -in....brrrr….
 

Attachments

  • 0112201614_Film2.jpg
    0112201614_Film2.jpg
    115.7 KB · Views: 350
  • 0112201435b_Film2.jpg
    0112201435b_Film2.jpg
    124.2 KB · Views: 368

olympicorange

Active member
………. finished securing the hyd./pwr. steering lines, governor control cable assy., fab'd mounting brackets for cable,....and
 

Attachments

  • 0123201636_Film2.jpg
    0123201636_Film2.jpg
    115.3 KB · Views: 319
  • 0123201635_Film2.jpg
    0123201635_Film2.jpg
    105.7 KB · Views: 333
  • 0123201453_Film2.jpg
    0123201453_Film2.jpg
    106.1 KB · Views: 317
  • 0123201453a_Film2.jpg
    0123201453a_Film2.jpg
    108.5 KB · Views: 317
  • 0122201539_Film2.jpg
    0122201539_Film2.jpg
    117.8 KB · Views: 306

olympicorange

Active member
….. started on the trans. controller routing, attachments, … next is the dash housing,….
 

Attachments

  • 0124201426_Film2.jpg
    0124201426_Film2.jpg
    61.8 KB · Views: 307

olympicorange

Active member
….. .. trans. control dash mount.....
 

Attachments

  • 0125201600_Film2.jpg
    0125201600_Film2.jpg
    122.3 KB · Views: 272
  • 0125201600a_Film2.jpg
    0125201600a_Film2.jpg
    122.9 KB · Views: 280
  • 0125201601_Film2.jpg
    0125201601_Film2.jpg
    120.6 KB · Views: 282

olympicorange

Active member
…… finished trans. control brackets, added brace, fuel tank & mount ,....
 

Attachments

  • 0126201531_Film2.jpg
    0126201531_Film2.jpg
    47 KB · Views: 264
  • 0126201650a_Film2.jpg
    0126201650a_Film2.jpg
    115.1 KB · Views: 255
  • 0126201650_Film2.jpg
    0126201650_Film2.jpg
    107.6 KB · Views: 252
  • 0126201531a_Film2.jpg
    0126201531a_Film2.jpg
    63.7 KB · Views: 258

olympicorange

Active member
…. hello brian, yeah ...no kidding ,... totally different winter from last year,...this time last year I was burning up the gas in the 'ol 318,... definitely no rush this year. I think ive worked every day with the shop door open,...crazy. global warming?? a few more things, and the next test drive soon....
 

Nikson

Bronze Member
GOLD Site Supporter
so a curiosity has been killing me about the box behind the passenger door on the side of the cab, whats that about?! cab ventilation?
 

olympicorange

Active member
so a curiosity has been killing me about the box behind the passenger door on the side of the cab, whats that about?! cab ventilation?


……… hey ''N'' ,..... so, yes …. a cab ''vent'' fan assy. haven't really paid much attention to it,.. it wasn't working ,.. so not sure if it ''draws in '' or ''out'' …. it may work, wasn't hooked up. if I run out of projects,....lol … ive only seen a few with it ,... anyone know more...… thx ...:thumbup:
 
Top