A lot of the wear pads are worn all the way down on my 604, most likely from driving on pavement and will have to be replaced. I don't know how your grousers are constructed but 2 miles is a long way. I've been trying to figure out how to get my 604 from the machine shed across the concrete then 200 feet inside my building to the back where the only heated room is. I don't want to even go the 400 feet. Not only for track wear but the marks in the concrete just from unloading off the trailer are probably never going away and I don't want that inside my building. I just constructed some 10ft fork extensions for my 6ft forks on my 10k forklift, 4 foot overhang. Tomorrow I'm hoping I can pick up the cat and take it where it needs to be. Either under the belly on the solid track rods or drive up on the forks under the tracks. This will make all dealing with all things much easier, including loading on trailers, which will be an ongoing and repeating task.