• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Kristi KT7 restoration pictures

Well I NEVER! OK so maybe once.

BigAl I have been waiting SO LONG for thet Yetti to get up and running. Hell I was just a young kid when you started and now I'm a Grandpa. I'm almost ready for the Old Folks home! As far as Mighty Mouse. Well he is just waiting to be repainted to look all new and fancy.
 
Ok ! Back to the theme of this thread :17875: !

The right angle drive motors are finally now in place and ready to be bolted up :thumb: . It took me most of the day hand filing the ujoint so it would slide up the output shaft far enough to allow the gear box to slip into place . What a royal pain in the butt that was :moon: .
Tomorrow I go get new bolts and lock nuts and finish her up on the inside .
I should have her all back together by Sunday night ,weather permitting .:coolshade :coolshade :coolshade
 
Mouse Ear ??? ,
Why are you always picking on me ??? I am doing the best I can to get ole Yetti repaired . The cost was unbelievable to repair those hydro's and besides that I have my monthly "Save the Earth from Global Warming " contribution that I must send in ,to defeat nay sayers like you . This does not even include my "Save the Fat Ass Whales", Green Piece of Sh#t, or the Sierra Shit#y Club dues that I must pay in to also .
Hopefully very soon I will have Yetti up and running so I can throw down fake snow in my shop and pretend to be in the back country saving wayward Snot Tracs from doom .
 
Sure Mouse Ear , deny everything like it never happened ......
Ok ,
The gear drives are hooked up and the Clam shells are installed . Remember those Damn snaprings that kicked my ass a year or so ago ??? Well , they are still doing it . I finally got one on after 5 hours of trying . Tomorrow I hope to get the other one in place .
I also tried damn hard to break my thumb with a nuclear powered 1/2 drill today . It puts out about 285 horse power and wrapped my thumb around the handle about 4 times before I could let go . My thumb is now about 6 " long . It also bends in any direction . Tomorrow I hope to find the thumbnail that was attached to it :smileywac .
 
"MY THUMB HURTS!"

If BigAl was on South Park!
 

Attachments

  • Picture 17.png
    Picture 17.png
    19.2 KB · Views: 324
This coming from a guy who has been working on HIS snowcat for 2 years?????? You of all people should know a work of art takes time. Not to mention alot of money! BUT I do have faith that this time the Yetti will roar to life and run like a scalded Ape!
 
Yetti only needs her Tracks put on and she is ready to head down to Chico for the new revised Hydraulic plumbing .Getting that last snapring in was a pain and I ended up building a set of snap ring pliers that really work .:thumb:

I'll be taking all my new hoses that I just had made a year ago with me when I head down to the shop . That was over a $1000 in Hoses when they were made up and I am hoping I can use some of them . I am going to give the hydraulic shop a call in the morning and hope I can take her down on Wednesday. It should not take to long unless they decide to go with a two hydraulic pump design . One for the body tilt and one dedicated to the hydro drive system . Terry seems to think this is where Kristi Co. made a big mistake by tying the two systems together .He seems to think she will really scoot across the snow, based on the bench test he ran on the motors :17875: . We shall see soon as they have a big field out back of the shop where they test run equipment after were finished putting the hoses on correctly .
 
Well Yetti all hooked up to the truck and ready to head down . The tracks went back on in a snap . I did a little welding that I wanted to do and plan to head out to my Buddy's welding shop tomorrow to cut off a piece of metal that is not needed . I'll them turn toward Chico or go down on Thursday morning . I'll be damn glad to finish this as it is starting to wear me down .I can't remember the last time something like this kicked my butt so bad .
When I bring it back , I'll need to replace some carpet and upholstery that I totally screwed up with grease and dirt and go over all the electronics one last time to insure they are working correctly . The "built in popcorn machine" seems to burn about every 3rd batch I make, so I need to check that too :yum: . I also have a leak in my Mini bar as it always seems to be empty the next morning :smileywac . I can't see it taking more than a day to do to take care of the little details . After that its just waiting for the snow to arrive:snow2_smi: .
 
Cool:thumb: :thumb: :thumb:
Big Al, could you post a video of it in action? :weneedpic: I didn't have much appreciation for this machine when you started, but I have followed your efforts closely and I now have a new appreciation for it. I look forward to seeing your sucess:applause: :tiphat:
 
Bulldog1401 said:
Cool:thumb: :thumb: :thumb:
Big Al, could you post a video of it in action? :weneedpic: I didn't have much appreciation for this machine when you started, but I have followed your efforts closely and I now have a new appreciation for it. I look forward to seeing your sucess:applause: :tiphat:
Click to expand...

Well I don't know how to do a video and put it on the internet ?????? We have a video camera that I use to tape my daughters Basketball games ,so they could review it later , but that is the extent of my talent with one .
How about a whole series of still pictures ???
If someone can do the upload I am all for it ,but we are on Dail up(28.8 K ),which is really ,really slow .
 
Snowcat Operations said:
BigAl,
I have a confession to make. Your Snowcat Bar doesnt have a leak. :drink: :1062: :rolleyes:
Click to expand...

YOU BASTARD !!!! I knew I wasn't drinkin that much ...... Though I could not be sure each morning as I woke up with a hangover ... Finally the truth is revealed .

So what do you think happened to it Mike :fart2: ????? I'm betting Bogus Bob or Toe Jam Tommo sneak in at night and drain me dry :beer: . There sneaky little so in so's .
 
After all the crap I have taken from you, Bogus Bob, Toe Jam Tomma , Loud Mouth Lnydon , and a few others that will remain unnamed for lack of a proper nickname ????!!! I'll bid $750 just to keep all the "super secret Kristi stuff" secure and out of the Clown Crews hands :moon: .
 
Wait, Big Al are we still on for the 28% commision we talked about, if that is the case I raise my bid to $10,000.01
 
You must log in or register to reply here.
Top