Has anyone convert a tractor over to using 12 volt with the original generator. I googled it and some people say to replace your field coils and others do not. Looks like to produce 12 volt all you need is the regulator. I am just concerned over reliability after changing it. I don't want to go alternator.
-
Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/
12 VOLT GENERATOR CONVERSION
- Thread starter Mr Bell
- Start date
I have heard both as well. My Ford 9N has been converted. The guy from whom I bought it said he just changed the generator and the regulator.. He said nothing about the coils.
Oh,,,,and the battery. 6Vlt to 12 Vlt
You may have to alter the mounting bracket as the more modern larger generator will likely not fit.
Oh,,,,and the battery. 6Vlt to 12 Vlt
You may have to alter the mounting bracket as the more modern larger generator will likely not fit.
tommu56
Bronze Member
I've seen 2 conversions one the guy put external ballast resistor in series with the original coil, 2nd just put standard 12v coil both had one wire chevy alternator put on to charge
Not having done it myself, I'm not an expert. I would bet however, somebody here is. I hope they post.
Meanwhile I offer this link
www.bing.com
Meanwhile I offer this link
ford 9n 6 volt to 12 volt conversion - Bing
Intelligent search from Bing makes it easier to quickly find what you’re looking for and rewards you.
Mr bell that is an interesting approach. Never heard of rewinding the generator. (Dont forget ignition coil)
Most folks think 12v is stronger than 6v but that is not the case. Work is 746watts per hp regardless of voltage.
A 9.6v cordless drill makes the same torque as a 12v or 18v tool ect. ( 6v just uses more current to accomplish same work as a 12v system)
I have restored/reinvigorated two vintage tuckers recently and kept them 6v positive ground. Verified the generator windings were intact, one had a bad regulator, but with clean connections 6v works really well.
Most folks think 12v is stronger than 6v but that is not the case. Work is 746watts per hp regardless of voltage.
A 9.6v cordless drill makes the same torque as a 12v or 18v tool ect. ( 6v just uses more current to accomplish same work as a 12v system)
I have restored/reinvigorated two vintage tuckers recently and kept them 6v positive ground. Verified the generator windings were intact, one had a bad regulator, but with clean connections 6v works really well.
Have at it.