• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Wanted: Spryte torsion axle

HankScorpio

HankScorpio

Member
I am working on a spryte full cab. One of my torsion axles is bad on the drivers side. I need some options. I would buy a complete widetrack torsion axle, a narrow one to widen or just a drivers half from another bad axle to weld into mine as a repair. Any info or leads would be appreciated. I am in southeast WY, 2 hours from Denver.
 
are your axles torsion spring axles or rubber axles you might also check with paul lect at pbl enterprises he may have what you are looking for
 
Snowtrac Nome said:
are your axles torsion spring axles or rubber axles you might also check with paul lect at pbl enterprises he may have what you are looking for
Click to expand...
Thanks for the lead. They are rubber torsion axles. The machine is missing its data plate so I am still figuring out exactly what everything is. I am a Tucker guy so this is all new.
 

Attachments

  • thiokol.jpg
    thiokol.jpg
    22.7 KB · Views: 271
HankScorpio said:
Thanks for the lead. They are rubber torsion axles. The machine is missing its data plate so I am still figuring out exactly what everything is. I am a Tucker guy so this is all new.
Click to expand...

A couple other leads for you: Thiokols, DMCs and LMCs were built in Logan, UT. Peterson Equipment in Logan were perhaps THE source for parts and knowledge for years. They sold all their parts inventory and have a non-compete clause, but the parts guy may be able to help you with suggestions. (I spoke with him about a year ago and thought he was friendly, helpful, knowledgeable and professional.) Peterson Equipment: https://petersonequipment.com/

The company that bought the parts inventory is Snow Cat Service in SLC. Here's their website: http://www.snowcatservice.com/

And of course there's forum member Pat at Spryte Improvement in Wallace, ID.
 
From your picture that is a b style spryte do you have the rubber torsion or spring?do you need
front or intermediate?
 
You must log in or register to reply here.
Top