• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Need 1644 or 1544 cab information

Tuckerterra2000

Tuckerterra2000

Member
I posted this over in the repair section, then realized it probably belongs in the resto/mod section šŸ«£ anyways....

Looking for someone that has a 1644, (or 1544) that would be willing to help me out with some pictures of the interior of their cab (and possibly some measurements?)

I'm in the process of converting my 1642 into a 1644, and all I have to go by is a handful of pictures of 1644s from a distance.
I know I can make it work with the info I have, but would love to get some more information on a few details from a factory design if someone was willing to help me with that.

We can post directly to the Forum or if phone numbers are easier to exchange texts that's fine with me.
 
i actually have both snow cats send me a list of what you want and when i get some free time i will see what i can do
 
Travler said:
i actually have both snow cats send me a list of what you want and when i get some free time i will see what i can do
Click to expand...
Fantastic!!! I believe these should be the same on the 1644 and thr 1544.
I am Looking for the total length of the cab, or really just where the rear of the cab ends.
It appears it'll be just after if the upper frame support above the rear track. Maybe a measurements in relation to that?

Also, More importantly, I can't tell how much room they allowd behind each door.
Currently, on my 1642 I have 9.75 inches from the where the door Striker is to the cab corner. I have to cut that section out and I can't tell how much Tucker allowed on the 1644 models. Currently there is only a .75" Square Tubing that runs vertically just behind the doors and goes up to the roof. Then the 1.75" square tubing that is the main roof support is just next to the rear window on the back wall. I believe I want to replace the .75 square tubing behind the doors with 1.75 inch square tubing just behind the front doors as well as just behind the rear doors to give correct roof support and roll over protection. ( Hopefully not needed šŸ«£)
The relationship between the rear door hinges and the front door might be nice to have as well. And then I would assume Tucker originally allowed for the same amount of room behind the rear door is what he did behind the front door, but I'm not certain of this.

When I say room behind the door, specifically the point from where the front door strike would hit to the opening for the rear door, and from there where the rear door strike is to the cab corner.
 
Does your 1644 have a full cab , or does it have a small bed behind the cab , my 1544 has a bed , my 1644 has a full cab
 
Build no 2 the same is a Tucker Motto.

Your cats are both same model idea but different.

First number or two if rubber is series 15/16 (carriers/idler size)

3rd number is the track count which is 4 on this comparison.

4th number is the door count. This can vary when less than 2 though.

Everything else is a box of chocolates Forrest Gump style. Cab size, racks, hinges, windows, window location, etc etc.

Specs on one might just be specs on one until you have see someā€¦..
 
You must log in or register to reply here.
Top