Header image

Need some advice on how to modify my 2021 Midsota TB-22

Midsota Man

New member

Looking for something to protect the front edge of the tilt deck when it is raised and when using a winch. Otherwise the cable could grind away the metal on the forward edge as well as eventually damage the cable itself. Is there a roller or pulley modification that someone has done or seen done to address this issue? Thanks for reading,

flatbed trailer stock photo.jpg

J5 Bombardier

Active member
I would pick up a small fairlead , tap the deck channel so it can be bolted /unbolted when not needed. Nice trailer by the way .
J5 Bombardier