My 1981 DMC 1450 WT is for sale. I’m looking at a 1200A flatbed with pretty nice track hardware and sprockets and need to make some room.
2100 hours with excellent running engine and transmission. The frame is undamaged and it looks like it’s never had a blade before.
This Wide Track 1450 has all 3 hydraulic options. It does not currently have a controller. It can be made for a front blade for about $200. I have the drawings and wiring diagram.
Rebuilt undercarriage and tracks
New:
cat and ignition wiring
fuel system with rebuilt carb
transmission cooler
water pump, belts and hoses
brake master cylinders
lights and beacon
heater fan
wiper motors
interior paint and carpet
I’m asking $17.5k or $20k with a good overdeck trailer. Located in western Washington State.
Thanks,
2100 hours with excellent running engine and transmission. The frame is undamaged and it looks like it’s never had a blade before.
This Wide Track 1450 has all 3 hydraulic options. It does not currently have a controller. It can be made for a front blade for about $200. I have the drawings and wiring diagram.
Rebuilt undercarriage and tracks
New:
cat and ignition wiring
fuel system with rebuilt carb
transmission cooler
water pump, belts and hoses
brake master cylinders
lights and beacon
heater fan
wiper motors
interior paint and carpet
I’m asking $17.5k or $20k with a good overdeck trailer. Located in western Washington State.
Thanks,