Hello! congrats on your purchase and thanks! this forum is a great source of infoust wanted to say hello HillBilt and to all. Just bought a 76 Bombi and like @Patroller said, I barely know what I'm doing. You thread is a great resource and thanks for taking the time. And to all of you that post, thanks. The community is quite small it seems.
Yeah, I'm gonna need a solution for that as well. Hows the head room sitting in that? Im short, 5'7 so I figured I could sacrifice a little headroom. Also thought a bout a cab chop and extension. The more I tear into this thing, the more i want to ditch everything in the cab and start fresh.
That looks really good. Just needs cup holders....
What dimensions are you looking for? width/length? I can measure it todayAny chance you have dimensions on the tub chassis? Im doing some modifications myself and am going to build a cad model of the machine once I strip it down. But if you had any as built dimensions that would be super helpful
thanks
Ive been getting pretty rowdy with a zippy wheel and using a torch to get the ones in the wheel guides. Been getting the majority with just breaking them loose by hand and hitting them with the impact, just more complaining then anythingDon't fight those bolts with the heads spinning
Get ya a couple of these bad boys. https://www.google.com/aclk?sa=L&ai...i8y5PIqr7tAhXTpJ4KHfIvDE0Q9aACegQIDBBL&adurl=
Should be easy to get at all the nuts.
Just split them and you're golden
A die grinder and a cutoff wheel will work, but you could nick the belting.
Or take a piece of sheet metal, drill a hole in it to lay over the nut to protect the track.....
The nut splitters work sweet though.....
Good luck on this one.
Rusted bolts are a bitch....especially when the head is a carriage type and you can't get at it.
sorry your looking for tube dimensions or tub?Length width and general interior dimensions of the tubes and well. Also a couple of pictures of the suspension if possible
Tub is 60” wide/100” longTub. Chassis.
Cutting disc for the win! Just cleaned my tub of all unnecessary bolts. It looks like swiss cheese now.Ive been getting pretty rowdy with a zippy wheel and using a torch to get the ones in the wheel guides. Been getting the majority with just breaking them loose by hand and hitting them with the impact, just more complaining then anything
I understand completelyIve been getting pretty rowdy with a zippy wheel and using a torch to get the ones in the wheel guides. Been getting the majority with just breaking them loose by hand and hitting them with the impact, just more complaining then anything
You order a diff gasket yet? I’m getting one made. Local gasket maker. If you need one, let me know. I’m gonna at least get one extra made.