Forums Forums - Off Topic Forum FUN





Go Back   Forums Forums - Off Topic Forum FUN > Snow Trac ST4, Kristi, Thiokol/LMC, Tucker, Bombardier & Other Snowcat Discussions > Snowcat Repairs, Parts & Problems Forum

Snowcat Repairs, Parts & Problems Forum Snowcat Repairs, Parts Inquiries, Sources, Problems & Advice

Reply
 
Thread Tools Display Modes
  #1  
Old 05-21-2018, 01:13 AM
CoFarmer CoFarmer is offline
Junior Member
 
Join Date: May 2018
Location: Nunn Co
Posts: 5
Thanks: 1
Thanked 5 Times in 2 Posts
CoFarmer is on a distinguished road
Default Tucker 1542 Vs. 1642

Just getting into the "snowcat world". Very seriously thinking about buying a Tucker for part of our winter operations and need one with a flat bed on back. Had a pretty good talk with a sales rep at Tucker who was VERY helpful. He feels I need to be looking for a 15, 16 or 17 serious Tucker. I understand the 17 series is a very large frame "industrial" machine. What are some differences in the 15 and 16 series? Any advice on the variations is appreciated.
Reply With Quote
  #2  
Old 05-21-2018, 02:28 PM
redsqwrl's Avatar
redsqwrl redsqwrl is offline
Bronze Member
 
Join Date: Feb 2011
Location: E central WI
Posts: 1,714
Thanks: 573
Thanked 931 Times in 392 Posts
redsqwrl is on a distinguished road
Default Re: Tucker 1542 Vs. 1642

I am sure there are some subtleties I am not aware of, but I do have a late 70's 1542 pick up style, and a mid to late 70's 1642 Mid engine. as far as i can tell the machines are the same. with the exception of the number of boggie wheels in the pontoons. nothing industrial about either.

after owning a cab forward 2000 series engine backward, a front engine pick up and mid engine engine/fan forward.

I like the Mid engine fan forward best for pulling a drag. the ability to see what the drag is doing is important, and the weight distribution is best.

the cabs are painfully smaller than they need to be, but depending what you intend to do with them, haul hay, haul water, drag down frost roads, or plow snow, transport people ect..... I am sure anything can be over come.
Reply With Quote
The Following User Says Thank You to redsqwrl For This Useful Post:
Pontoon Princess (05-21-2018)
  #3  
Old 05-21-2018, 02:51 PM
Blackfoot Tucker Blackfoot Tucker is offline
Bronze Member
 
Join Date: Feb 2009
Posts: 843
Thanks: 56
Thanked 443 Times in 182 Posts
Blackfoot Tucker is on a distinguished road
Default Re: Tucker 1542 Vs. 1642

First, Welcome to the forum!

A 1500 series Tucker has mid length tracks. They have five "idler wheels" (the correct term - as opposed to bogie wheels) and the tracks are 76" long. The 1600 series tracks have a sixth idler wheel and are 92" long. The carriers are the steel frame that idler wheels attach to and what the tracks rotate around, are symmetric on a 1500 series machine and asymmetric on a 1600 series. Of the extra 16" in length, 13 are on one side and three inches are on the other. The long side of a 1600 series carrier is positioned away from the center of the machine.

The 1700 series is essentially a heavy-duty variant of a 1600 series. But that heavy duty capability comes with a weight penalty. 1500 and 1600 series machines had basically the same power train options, but the 1700 series is different.

Cab options are two door (think regular cab pickup), four door (think crew cab pickup) and three door, which is a full cab. It has two front doors and one rear door to access rear opposing benches.

Price-wise, a two door short track model (1342) will generally be the cheapest and a 1643 or 1644 will be the most expensive. The base power train would be a 318 Industrial V-8 coupled to either a 4-speed or 5-speed New Process manual transmission. There were different engines and transmissions available.

I don't think there was such a thing as a "standard" bed, and generally speaking the factory beds were fairly small. But it's not difficult to build a larger custom bed.

If you're not stuck on getting a Tucker you might consider a Thiokol/DMC/LMC machine. I would suggest a Spryte, and ideally a 1200C if made during the Thiokol days or a DMC or LMC 1200. Those machines came in standard width and wide track models. The Thiokol versions have doors that are kind of goofy in the way you have to climb in. The DMC and LMC versions have larger doors that make getting in and out easier.

Generally speaking Thiokols sell for less money than a Tucker in similar condition.

That's a basic overview. If you Google "snowcat spec sheets" that should provide a link to various manufacturer and model options at the Safety One website. You can learn quite a bit looking those over.
Reply With Quote
The Following 3 Users Say Thank You to Blackfoot Tucker For This Useful Post:
bobby wilkes (05-22-2018), CoFarmer (05-21-2018), Pontoon Princess (05-21-2018)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tucker 1542 tie rod end PN? Z1TURBOCAT Snowcat Repairs, Parts & Problems Forum 2 03-30-2017 08:12 PM
Tucker 1542 Maine Craigs Track Addict Snowcat Classifieds (For Sale / Wanted) Forum 0 03-23-2017 09:35 AM
Tucker 1542 on Craidslist tom Snowcat Classifieds (For Sale / Wanted) Forum 0 06-17-2016 11:25 AM
WTS 76 1542 Tucker wakeupcall Snowcat Classifieds (For Sale / Wanted) Forum 25 10-07-2014 01:26 AM
WTS 1975 Tucker 1542 Snowcat four track Snowcat Classifieds (For Sale / Wanted) Forum 49 01-19-2013 08:30 AM







All times are GMT -4. The time now is 09:10 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2002 - 2018 www.ForumsForums.com