• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Imp 1450 Master Cylinder fittings

JKS

New member
Currently trying to find new fittings for the master cylinders on the Imp 1450. It is a banjo style block fitting (part #0101444 from the Thiokol parts manual). The banjo bolt going into the master cylinder is 1/2" - 20 and the brake line in 1/4" tubing with flare. Has anyone found this item or a suitable replacement?
 

PrecisionMarine

New member
A lot of trailers use banjo fittings to go from 3/16" brake lines (tubing measured by internal dia.) with 3/8"-24 inverted flare fittings, to the caliper. This is one example, though it doesn't show the threads or thru-bolt size, you should be able to call them and find out.
http://www.pacifictrailers.com/trailer-disc-brake-banjo-fitting/
Or Google "brake line inverted flare fittings" for lots of results..
Good luck!

A p.s.: at the rear, I found a hydraulic hose & fittings that went directly from 3/16" brake line to hose, hose to slave cylinder.. eliminating several stock Thiokol fittings and possible leak points. I'll dig out the part numbers and a photo and post later..
 
Top