Forums Forums - Off Topic Forum FUN




Go Back   Forums Forums - Off Topic Forum FUN > Snow Trac ST4, Kristi, Thiokol/LMC, Tucker, Bombardier & Other Snowcat Discussions > Snowcat Repairs, Parts & Problems Forum

Snowcat Repairs, Parts & Problems Forum Snowcat Repairs, Parts Inquiries, Sources, Problems & Advice

Reply
 
Thread Tools Display Modes
  #1  
Old 03-04-2019, 12:44 PM
partsman11 partsman11 is offline
Junior Member
 
Join Date: Oct 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
partsman11 is on a distinguished road
Default Skidozer bolt on wheels

I have been trying to find some 12" wheels for my Skidozer. I went and looked at a parts machine SV-250 that had bolt on wheels separate from the hub. Was this a factory setup from Bombardier? Will these hubs fit my machine?
Attached Images
 
Reply With Quote
  #2  
Old 03-04-2019, 06:54 PM
undy undy is offline
Bronze Member
 
Join Date: Oct 2011
Location: Madison, WI area
Posts: 722
Thanks: 65
Thanked 156 Times in 97 Posts
undy is on a distinguished road
Default Re: Skidozer bolt on wheels

My SV-252 has 1-piece wheels that do not unbolt from the hub.
I don't know if your hubs are factory or not, nor whether that setup might fit my spindles. But that's definitely different than what's on my cat.
__________________
Bones heal and chicks dig scars.
If I die in my ski boots, I win. In fact, I hope to die skiing - just not today.
It is better to go skiing and think of God, than go to church and think of sport. Fridjof Nansen
Reply With Quote
  #3  
Old 03-04-2019, 07:18 PM
MNoutdoors's Avatar
MNoutdoors MNoutdoors is offline
Tracked Evolution Central
 
Join Date: Jan 2007
Location: AK.,AZ.,CA.,MN.,MT. Home of all the villes
Posts: 3,369
Thanks: 6
Thanked 1,059 Times in 475 Posts
MNoutdoors is on a distinguished road
Default Re: Skidozer bolt on wheels

The bolt on wheels were factory in the early years the spindles are smaller and two different sized bearings

The later models had larger bearings (2788) and both the front and the back are the same size
__________________
The Tracks you leave today, Will lead you to the future!
Reply With Quote
  #4  
Old 03-12-2019, 09:46 PM
partsman11 partsman11 is offline
Junior Member
 
Join Date: Oct 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
partsman11 is on a distinguished road
Default Re: Skidozer bolt on wheels

Thank you for the info
Reply With Quote
  #5  
Old 03-13-2019, 10:21 AM
Ski Lima's Avatar
Ski Lima Ski Lima is offline
Formerly Backyardski
 
Join Date: Dec 2015
Location: Lima NY
Posts: 216
Thanks: 471
Thanked 332 Times in 110 Posts
Ski Lima is on a distinguished road
Default Re: Skidozer bolt on wheels

Is that the same size hub and bolt pattern as on the bombardier mp? Those have 5.3-12’s
Reply With Quote
  #6  
Old 03-13-2019, 10:57 AM
MNoutdoors's Avatar
MNoutdoors MNoutdoors is offline
Tracked Evolution Central
 
Join Date: Jan 2007
Location: AK.,AZ.,CA.,MN.,MT. Home of all the villes
Posts: 3,369
Thanks: 6
Thanked 1,059 Times in 475 Posts
MNoutdoors is on a distinguished road
Default Re: Skidozer bolt on wheels

No those are different size that's larger
__________________
The Tracks you leave today, Will lead you to the future!
Reply With Quote
  #7  
Old 03-15-2019, 11:51 AM
partsman11 partsman11 is offline
Junior Member
 
Join Date: Oct 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
partsman11 is on a distinguished road
Default Re: Skidozer bolt on wheels

Bogie
Would I be able to use the entire assembly (Flexitor,Axle arm, spindle and wheel) on another machine?
I have a SV 301 that now has 29" tracks. The first axle and (Bogie) wheel has a wheel with the bearing that is correct. I would be installing the next 4 on both sides.

If I did this, would I set the flexitor angle up for the SV 301?

The parts machine is a 1970 SV-250 Th flexitors are all facing the same direction.

I also need more steel grousers for the 301. Would I call MN Outdoors or PM you direct?
Reply With Quote
  #8  
Old 03-15-2019, 12:24 PM
MNoutdoors's Avatar
MNoutdoors MNoutdoors is offline
Tracked Evolution Central
 
Join Date: Jan 2007
Location: AK.,AZ.,CA.,MN.,MT. Home of all the villes
Posts: 3,369
Thanks: 6
Thanked 1,059 Times in 475 Posts
MNoutdoors is on a distinguished road
Default Re: Skidozer bolt on wheels

Quote:
Originally Posted by partsman11 View Post
Bogie
Would I be able to use the entire assembly (Flexitor,Axle arm, spindle and wheel) on another machine?
I have a SV 301 that now has 29" tracks. The first axle and (Bogie) wheel has a wheel with the bearing that is correct. I would be installing the next 4 on both sides.

If I did this, would I set the flexitor angle up for the SV 301?

The parts machine is a 1970 SV-250 Th flexitors are all facing the same direction.

I also need more steel grousers for the 301. Would I call MN Outdoors or PM you direct?
I believe you could use the entire assembly the axles are a little weaker but should work

Yes,contact www.mn-Outdoors.com for the 29 cleats currently INSTOCK
__________________
The Tracks you leave today, Will lead you to the future!
Reply With Quote
  #9  
Old 03-15-2019, 03:03 PM
partsman11 partsman11 is offline
Junior Member
 
Join Date: Oct 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
partsman11 is on a distinguished road
Default Re: Skidozer bolt on wheels

I will contact Mn Outdoors

Would you have the flexitor direction and angle chart?
I found one on this site from a SV 250 manual
Is it the same for the 301 Frame or will I need to get a manual for it?
Reply With Quote
  #10  
Old 03-15-2019, 03:56 PM
MNoutdoors's Avatar
MNoutdoors MNoutdoors is offline
Tracked Evolution Central
 
Join Date: Jan 2007
Location: AK.,AZ.,CA.,MN.,MT. Home of all the villes
Posts: 3,369
Thanks: 6
Thanked 1,059 Times in 475 Posts
MNoutdoors is on a distinguished road
Default Re: Skidozer bolt on wheels

Quote:
Originally Posted by partsman11 View Post
I will contact Mn Outdoors

Would you have the flexitor direction and angle chart?
I found one on this site from a SV 250 manual
Is it the same for the 301 Frame or will I need to get a manual for it?

Here is the settings
Attached Images
 
__________________
The Tracks you leave today, Will lead you to the future!

Last edited by MNoutdoors; 03-15-2019 at 04:13 PM. Reason: Upside down picture
Reply With Quote
  #11  
Old 03-15-2019, 08:50 PM
undy undy is offline
Bronze Member
 
Join Date: Oct 2011
Location: Madison, WI area
Posts: 722
Thanks: 65
Thanked 156 Times in 97 Posts
undy is on a distinguished road
Default Re: Skidozer bolt on wheels

Somebody should make that diagram a sticky!
__________________
Bones heal and chicks dig scars.
If I die in my ski boots, I win. In fact, I hope to die skiing - just not today.
It is better to go skiing and think of God, than go to church and think of sport. Fridjof Nansen
Reply With Quote
The Following User Says Thank You to undy For This Useful Post:
Ski Lima (03-16-2019)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Track bolt patter Rat Track Snowcat Adventure & Usage Forum 1 07-20-2015 09:14 AM
Tucker Trunion Turntable bolt ? Track Addict Snowcat Repairs, Parts & Problems Forum 5 08-07-2014 09:31 AM
Russian Bolt ons....who's seen em?...... On Topic berg Snowcat Restoration & Modification Projects Forum 3 01-08-2014 10:47 PM
WTB 5 bolt large wheels or 6 bolt hubs couchloafer Snowcat Repairs, Parts & Problems Forum 8 02-09-2009 12:46 AM







All times are GMT -4. The time now is 01:53 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2002 - 2018 www.ForumsForums.com