• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

John Deere 333E

raffystoneconst

New member
after changing hydro hose that busted going to the cooling fan the skid steer is running hot. fan does turn and adjust to RPM as it should. all fluid levels are full.
 

JimVT

Bronze Member
GOLD Site Supporter
I did about the same and the oil got into the fins on the radiator and plugged it by collecting dust. it wasn't noticeable and the temp went up when working hard.
jim
 

raffystoneconst

New member
After replacing the hose while the cab was lifted and floor board was out I did clean the air coils and pressure wash everything. Is the a fan bypass valve that need resetting?
 
Top