• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

ST4 Drive drain tension

Crackingday

New member
Hi All

Ive done a search for 30 mins and read loads, can't find the info though

Im worried one of my drive chains is too lose and is skipping off the gear at the front.

How do i check tension and adjust if required?

Many thanks x
 

300 H and H

Bronze Member
GOLD Site Supporter
First detention your track at the rear wheels. To tighten the drive chain, lengthen the rod inside of the track line at the front of the machine. This rod pushes the driven sprocket forward, rolling on the pivot on the bottom of the axel housing, and tightens your drive chains. Leave just a little slack, maybe half an inch of play in the chains. Retention the tracks and your done.

Regards, Kirk
 
Top