Brokenbones
New member
I am in the process of repowering my bombi with a GM 2.2 and auto trans. I purchased an entire 1995 chevy p/u for $300 that ran and drove but needed brake and fuel lines to get a sticker so it was deemed junk.
I set the engine/trans in the tub to check length, width and depth and measure for the motor mounts. My next step is to reinforce and add a reciever style hitch on the back of the tub. I would like to get all the welding and cutting done before i send out for blasting. This will be a slow process and is in the early stages but i will get pics as i go.
I set the engine/trans in the tub to check length, width and depth and measure for the motor mounts. My next step is to reinforce and add a reciever style hitch on the back of the tub. I would like to get all the welding and cutting done before i send out for blasting. This will be a slow process and is in the early stages but i will get pics as i go.