Bombi cab

Ok guys, I picked up this bombi last spring to rebuild and use at my cabin for personal enjoyment. The cab was in pretty rough shape so I have made new doors,roof and cab back out of .080 aluminum. I have worked over the fiberglass nose and have it ready to paint. I have been kicking around the idea of changing cab up some. It adds a lot of room on the inside of cab. I was just looking for opinions whether to do this or not. Has anybody else done this? It would be easy to do. I mocked up a temp cab from cardboard. If I do make this it would be out of the same .080 aluminum. What’s your thoughts and opinion. I have added pictures with original nose and also proposed piece. This is a great sight. Thanks for your input.

Some ideas

I’m in the process of the same consideration. I took out the gas tank (going with a sand rail gas tank in back where the hydraulic manifold used to be).....and thought I’d raise the cab height to get a full set of seats in. I really like your mock up.

the bars are always helpful.at least on mine. it smoked for a week.

…..………. skidsteers are good for that also.... soils the shorts....

JimVT said:

the bars are always helpful.at least on mine. it smoked for a week.

Click to expand...

DaaaaamN!

MNoutdoors said:

Some ideas

Click to expand...

Is this your personal? This is so bad ass!

The cardboard mockup looks great...Cheap way to get a "Touchy Feely" Eyes on an idea...I like the look.
The upside down look is a bit scary....
I have personally done that trick with a skid steer....yes...10-4 on the soiled shorts.
Going uphill and do it over backwards will really get the adrenaline flowing good...

JimVT said:

the bars are always helpful.at least on mine. it smoked for a week.

Click to expand...

Hey! Did you save you some $$ on those ramps and made them good and short?

The rake on the front of the tracks given the front sprockets really made that offload rather interesting