• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Looking for 1987 LMC 3700c RF spindle assembly

bottle washer

New member
Looking for just the spindle assembly. The tensioner is still good. This one has the little plastic wheel on the other side of the arm. Would be great to get the bearings also... any info would be great!! 315-725-3659
 

redsqwrl

Bronze Member
GOLD Site Supporter
Im guessing you have the short 1/2 an axle. and you needed the stub.

were they able to save the flexi part of the assembly and just bore out the old spindle?
 

bottle washer

New member
The threads had broken off the spindle, clean break... they drilled and threaded the spindle and used a stud screwed into it and then welded. Seems to be working as intended.
 
Top