• Please be sure to read the rules and adhere to them. Some banned members have complained that they are not spammers. But they spammed us. Some even tried to redirect our members to other forums. Duh. Be smart. Read the rules and adhere to them and we will all get along just fine. Cheers. :beer: Link to the rules: https://www.forumsforums.com/threads/forum-rules-info.2974/

Thiokol 1404 Imp possible for sale $20k

Meee

Member
Thiokol 1404 Imp possible for sale $20k

This is serial # 535
Ford v4 gas 12 speeds forward 3 reverse
5 man cab
4 bucket seats
programmable 3 band radio (FRS now) Ham radio (License needed)
stereo with nav, back up cam, bluetooth ect
new alternator replace generator
new wiper motors
all digital dash w/ gps speedometer
650+- original hours
brand new tracks with new belts, all grousers in great shape with added extra bolting plate. This simplifies track maintenance and grouser replace (picture shown)
all new foam filled boggiescand bearings
New horn and button
Heater works great
dual batteries and two bank charger with 3 mode smart charging
new leaf springs
new front idlers from Spryte Improvement
Sprockets in good condition
New paint
new interior
Hydraulics with Mile Marker hydraulic winch
6 LED Light bars
LED flag wip
LED warning/emergency flashing with modes yellow/white
Roof rack
This is a super nice rig that have made many improvements to.
Yet it was not a total ground up rebuild. For as I have I should have totally stripped it down.
It is super dependable but not perfect.
Just little things .... One master cylinder was replaced one was rebuilt. the rebuilt could use a new replacement. The points are replaced with electroinc ignition but I'll damned if i cant get the digital tach to calm down, put the diode in helped a little.
So there are things to tinker with.

So I'm building a house, don't really want sale my snowcat, but I need the money.
Seeing the other stuff out there I think $20k is reasonable to ask for.

I was building a snowplow for it but came to the opinion that it really doesn't need it, but I'll thrown in the steel and cylinders.
 

Attachments

  • 20190228_130053 (2).jpg
    20190228_130053 (2).jpg
    204.8 KB · Views: 1,175
  • 20180608_210139.jpg
    20180608_210139.jpg
    76.4 KB · Views: 1,112
  • 20170826_213915.jpg
    20170826_213915.jpg
    182.4 KB · Views: 1,112
  • 20190223_133948.jpg
    20190223_133948.jpg
    140.9 KB · Views: 1,121
  • 20190427_144230.jpg
    20190427_144230.jpg
    87 KB · Views: 1,076
  • 20181216_131839.jpg
    20181216_131839.jpg
    83 KB · Views: 1,106
Last edited:

andyv916

Member
Does your Imp have the Tach regulator mounted inside the motor compartment on the drivers side wall ? If so get rid of it and chase the three wires down and your tach will be just fine .
 
  • Like
Reactions: TJR

sno-drifter

Bronze Member
GOLD Site Supporter
I had the opportunity to check out this Imp this week end. A very Quality restoration. New belting very nice instrumentation. A good buy for some one. Wrong color for me.
 

Meee

Member
I have a 12v hydraulic pump mounted in the tunnel. Didn't really want to rob hp off the engine for hydraulics that aren't used that much. Have it on a heavy duty battery switch and hooked up to the secondary battery.
 
Hello Meee, Nice Imp! I'd like to talk to you about it. I may be in Medford in a week so give me a call at 253-241-8019. I'm in Seattle, WA.
 
Top