Ive been toying with the idea of building my own cat now for a bit. This idea has been passed around here before but I wanted to get your input and here some of your ideas.
Engine: Chevy aluminum block and heads 4.3 V6
Transmission: Turbo700R4
Rear Diff: OC12 with drop down axles.
Tires and rims: 235/85R16 On alcoha rims
Frame: Built off of Spryte frame.
Cab: Insulated 10 passenger unit designed for expedition type use.
Suspension: Torsion axles
Grousers: Aluminum grousers designed for deep powder use.
I would want lots of ground clearance for running in deep powder and a smooth bottom. Maybe skin it in aluminum with quick disconnect fasteners.
Please add what you want.
Engine: Chevy aluminum block and heads 4.3 V6
Transmission: Turbo700R4
Rear Diff: OC12 with drop down axles.
Tires and rims: 235/85R16 On alcoha rims
Frame: Built off of Spryte frame.
Cab: Insulated 10 passenger unit designed for expedition type use.
Suspension: Torsion axles
Grousers: Aluminum grousers designed for deep powder use.
I would want lots of ground clearance for running in deep powder and a smooth bottom. Maybe skin it in aluminum with quick disconnect fasteners.
Please add what you want.
Last edited: