$25,000 for everything.
The Cat: 1983 Pisten Bully PB060DR (similar to a 70); 5237hrs; 2 stick, Hydrostatic drive(Min-Max MPH 0-~10); Mercedes OM616 four-cylinder diesel (71hp @ under 2gal/hr diesel consumption); 12volt system; Auxiliary hydraulics have been removed from cat and are not in my possession. Interior excellent; Exterior good (some surface rust above rear window, Aluminum decking warped) Track belting is spliced and dependable, New (2013) refurbished Fall-Line sprockets. No frame cracks present or repairs to frame have been conducted. Very clean, mechanically sound machine that has fresh filters and oils throughout (2013 or <10hrs).
108"YTS Ginzu: 108" steel frame YTS Ginzu with low use. Twin electric track setters, Custom transport wheels/frame (manually operated), Custom pintle ring/lunette for adjusting hitching height and tongue length.
The Roller: 84" x 24" diameter roller (94" total width); Integrated wiring harness to be used with or without Ginzu. Great for packing down early snow fall. Actually, the combination helps reduce the bridging of snow/ice in front of ginzu knifes.
Dimensions: Snowcat- 85"wide, 124" long, 84" tall (4200 lbs); Ginzu 108"; Roller 84" x 24" dia., 94"frame width, 80" total length.
Entire snowcat with attachments coupled measure 27'. Possible to get length to 24' for transporting on trailer.